...
...
...
...
...
...
...
...
...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Adding a Tire Inspection through the Work Order Screen
Once the Tire and Axle Setup is complete you can enter the Tire inspections electronically in the system. See RTA Web - Tire Inspection Setup for more information on how to.
Inspections can be entered five different ways:
...
From RTA Web, clicking the
...
Work Orders
...
Adding a Tire Inspection through the Asset File
Select the Tire Inspection Section from in the Asset file
...
Tire Inspection Section
...
Select the 
button
...
This menu option under Maint. & Repair, select a Work Order from your list.
...
While in the Work Order select the Tire Inspection button from in the Asset section.
The following Inspection entry panel will pop up:
...
| Tip |
|---|
🔓 Denotes fields that are editable within RTA Web |
The following items will be presented in the Tire New Inspection screen.
Asset – This field displays the Asset Number you are inputting the inspection for
🔓 Date – Select the date when the inspection was Completed
🔓 Odometer – Select the Asset Odometer reading when the inspection was Completed
🔓 PSI/TD – Enter the Pressure Reading (PSI) and Tread Depth Reading per axle
These tie into the axle and position codes that were setup initially for the asset. See RTA Web - Tire Inspection Setup for more information
Note the data entry prompts will repeat for all position and axle combinations for this vehicle
Also below the PSI and TD (Tread Depth) numbers foes show the recommended minimum numbers
Once the sections are updated then select the Submit Button.
...
Completed Tire Inspection Transaction
Once a Tire Inspection is completed the transaction gets added to the Asset file as a permanent record that can easily be reviewed throughout the service life of the Asset.
...
Refer to Adding Tire Inspectionin Work Orders for the step by step instructions on adding the Tire Inspection data into the New Inspection form.