| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Adding a Tire Inspection through the Mobile Paperless Shop Screen
From RTA Mobile Application, click the Paperless Shop menu option and select a job to clock in to from your Jobs list. Refer to the Clocking on to Jobs option within the Mobile Application.
Once clocked in to a Work Order Job Line click Scroll down to the Tools Section: Refer to the Tools Section in RTA Mobile - Paperless Shop Tools Section
...
Enter the Current Odometer with a Submit or Skip button.
...
The Vehicle Tire Position Brake Inspection Axle List will pop up and you will enter in to each position and update the data.
...
Within the Position record Axle Record you are presented with:
PSI - Pressure Reading
Tread Depth Reading
...
Left Brake Thickness Reading - This could be in Percentage, Inches, Millimeters or 32nds. See RTA Web - Brake Inspection Setup
Tight Brake Thickness Reading - This could be in Percentage, Inches, Millimeters or 32nds. See RTA Web - Brake Inspection Setup
...
Use the Side Arrows at the bottom of the screen to cycle you through the Axle readings
...
| Note |
|---|
Note: If the Data being entered does not meet the minimum data seen just to the right of the entry field below the Critical Thresholds you will see a ❗circle in front of the number. |
Once all the Tire Position Axle data is entered then hot select the Finish Button.
...
You should get a notification that the Tire Brake Inspection was added.
| Info |
|---|
You can review the Tire Reading Transactions Brake Inspection Readings from the Asset file in Web. Refer to the Completed Tire Brake Inspection section in Adding Tire Brake Inspection |