...

For more information regarding vehicle PMs and PM features, refer to the "Preventive Maintenance" section in Chapter 3Vehicle Inventory in the RTA User's Manual.."

Anchor
_Toc487792590 _Toc487792590

Running the Utility

1. Select System > Custom Utilities > PM > Set PM from the RTA main menu (SCPS).
2. Read the message displayed and then choose OK to continue.
3. Enter a facility number or press F1 to select a facility from the lookup list.
4. Select a radio button indicating whether the PM record will be updated for a Vehicle range or for vehicles that belong in a specific Department or Class code. If the Vehicle radio button is selected, specify the starting and ending vehicle numbers to process. If the Department or Class radio button is selected, enter the vehicle class code or department number to process.
5. Select or deselect the checkboxes as needed.

• • Check Fields to Include: Most of the checkboxes in this section correspond to the fields in the PM Information section (middle section of the window). Select the checkboxes for PM fields you wish to update. For example, if the PM nest checkbox is selected, the Include PM field will be accessible for changes or additions; if the box is not selected, this field will be unavailable (dimmed). The Postings checkbox corresponds to the Last Done entry fields in the Intervals And History section (bottom section of the window).
  • Check Intervals to Include: These checkboxes correspond to the Interval fields in the Intervals And History section.

  • Miscellaneous Options: These checkboxes determine what will happen in certain scenarios. Refer to the table shown.

    
    

    Checkbox	Action Performed with Checkbox Selected	Action Performed with Checkbox Deselected
    Create new PMs Are you adding a PM or changing an existing PM record?	Creates a new PM if the PM code does not currently exist in the vehicle PM record.	New PM is not added to the vehicle record. Deselect this checkbox when you are making changes to existing PMs rather than setting up a new PM schedule.
    Update existing Do you want to overwrite existing PM records or skip them?	If a matching PM code is found in the vehicle PM record, that PM record will be updated with the new PM information.	If a matching PM code is found in the vehicle PM record, that PM record will be left as is—no changes will be made.
    Disable PMs Do you want to enable or disable the PM record?	If a matching PM code is found, it will be disabled and that PM will no longer be in use. The Update existing checkbox must be selected for this option to be available.	If a matching PM code is found, that PM record will be enabled and active.
    Clear postings Do you want to clear the PM history in the vehicle PM record? Doing so will affect next PM due projections.	Be careful when using this option! This will clear the information in the Last Done fields. This option only affects the PM information in the vehicle record; it does not change vehicle history or work order data. The Postings checkbox must be selected for this option to be available.	PM history in the vehicle record will be left as is.

    
    

Enter the PM information to add or change. The availability of the fields in the PM Information section will vary depending on the settings of the checkboxes marked in step 5.

Enter the PM intervals and/or PM history to add or change. To lock or unlock an interval, select/deselect the lock checkbox. The availability of the fields in the Intervals And History section will vary depending on the checkboxes marked in step 5. When setting alternate meter PM information, the alternate meter selected here must match the existing alternate meter in the vehicle record in order for the alternate meter additions or changes to be made. For example, if you selected LOADS as alternate meter 1 here, LOADS must already be set as alternate meter 1 in the vehicle record.

Review the settings and data entered and then choose OK to proceed.