...
Step 1 is done in your fueling program; contact the fuel system vendor if assistance is needed to complete this step. The remaining steps are documented in the following sections in this chapter. Once all the steps have been successfully completed, fuel transactions will exist in the RTA system just as if they had been manually keyed in one by one. At this point, you can proceed as you normally would before the EFI option was in place. If you normally post the transactions to pumps and tanks after entering them in RTA, then that is what you will do next; if you normally enter pump meter readings, stick readings, and fuel drops—do that. In other words, process the fuel transactions in RTA just like you have in the past. If you have not used the Fuel Inventory module in RTA before, refer to the "Tracking Fuel Inventory" in Chapter 4Fuel Inventory in the RTA User's Manual for for more information.