| Table of Contents | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Initial System/Hardware Requirements:
Citizen CL-S700 or CL-S632 S621 (Can be purchased from us)
Network Card for the Citizen Printer (Can be purchased from usPrinter must be on the Network. (Network card)
Windows Only Computers
Install Printer on the network
| Note |
|---|
Note: You may need to consult your I.T. Department to assist with Install. |
Installing Print Drivers:
Navigate to https://www.
...
citizen-systems.com/us/support
...
/drivers
...
-and-tools/CL-S621?cHash=3285429b7f336f6b308a19d4dbd70f64
Download the printer driver and run the installation
Accept terms
Hit next on directory screen
Uncheck installation instructions and hit finish
Say yes to the make changes prompt
Keep it on install printer drivers and hit next
Select network and hit next
Find Citizen CL-S700II and next
Create port
Standard TCP/IP Port
Hit New Port
Click Next
Enter in the Printer IP into the IP Address field (See the IP Address on front Printer Menu Screen)
Hit Next
| Note |
|---|
Note: The Citizen Printer must have an internal network card installed in order to be used as a Network Printer. You can contact RTA for inquiries on the Citizen Network Cards. |
...
Hit
...
Finish
Select port you created and hit next
Leave printer name alone and hit next
Hit finish
Installing:
...
Can close out of printer settings if there is any up
...
Installing RTA
...
Barcodes
...
Download RTAPrintBarcodesInstaller.exe from https://customers.rtafleet.com/files/printbarcode.zip
...
Unzip and RUN AS ADMINISTRATOR:
...
Follow the instructions in the wizard, including providing an available port number for the printing app to use.
Then Select Next
...
Select Next
...
Select Next
...
Select Install
...
Select Finish
...
Windows Task Scheduler Settings:
| Info |
|---|
It is recommended that if you opted to launch the printing program from startup you will want to make some setting adjusts in the Windows Task Manager. |
Open Windows’s Native Application, “Task Manager”
...
Select the “Task Scheduler Library” folder (not its dropdown arrow) from the left hand file structure.
...
Navigate to and double click the RTA Print scheduled task to access the Settings
...
From the Settings Screen:
In the General Tab Check the box for hidden
...
In the Conditions Tab Uncheck any boxes that are checked
...
In the Settings Tab:
Uncheck the “Stop the task if it runs longer than:” box
| Note |
|---|
Note: Leaving this checked will end automatic startup after the specified amount of time. The application will need to be uninstalled and reinstalled to automatically generate a new scheduled task, or else a new task will have to be be manually created. |
Once Done Select File and Exit
...
and Printer Service
Next to install the Barcodes and Printer Service refer to: Installing Barcodes and Printer Service.
Fleet360 Application Printer Setup Instructions:
For Printer Settings and setup in the RTA Web Application see the section on RTA Web - Facility Printers Tab.