...
...
...
...
...
...
...
...
...
...
...
...
...
...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Adding a Tire Inspection
...
Once the Tire and Axle Setup is complete you can enter the Tire inspections electronically in the system. See RTA Web - Tire Inspection Setup for more information on how to.
Inspections can be entered five different ways:
...
In the Asset File Manually (See Below)
...
Adding a Tire Inspection through the Asset File
Select the Tire Inspection Section from in the Asset file
...
Tire Inspection Section
...
Select the 
button
...
This following Inspection entry panel will pop up:
...
| Tip |
|---|
🔓 Denotes fields that are editable within RTA Web |
The following items will be presented in the Tire New Inspection screen.
Asset – This field displays the Asset Number you are inputting the inspection for
🔓 Date – Select the date when the inspection was Completed
🔓 Odometer – Select the Asset Odometer reading when the inspection was Completed
🔓 PSI/TD – Enter the Pressure Reading (PSI) and Tread Depth Reading per axle
These tie into the axle and position codes that were setup initially for the asset. See RTA Web - Tire Inspection Setup for more information
Note the data entry prompts will repeat for all position and axle combinations for this vehicle
Also below the PSI and TD (Tread Depth) numbers foes show the recommended minimum numbers
Once the sections are updated then select the Submit Button.
...
Completed Tire Inspection Transaction
Once a Tire Inspection is completed the transaction gets added to the Asset file as a permanent record that can easily be reviewed throughout the service life of the Asset.
...
through the Mobile Work Order Screen
From RTA Mobile Application, click the Work Orders menu option and select a Work Order from your list.
Once in a Work Order click in to the Lines Detail: Refer to the Jobs Details in RTA Mobile - Work Order Table of Contents
While in the Job Details Screen click on the Blue Menu Button and select the Tire Inspection.
...
The following Inspection entry screens will pop up:
Enter the Current Odometer with a Submit or Skip button.
...
The Vehicle Tire Position List will pop up and you will enter in to each position and update the data.
...
Within the Position record you are presented with:
PSI - Pressure Reading
Tread Depth Reading
...
| Note |
|---|
Note: If the Data being entered does not meet the minimum data seen just to the right of the entry field you will see a ❗circle in front of the number |
Once all the Tire Position data is entered then select the Finish Button.
...
You should get a notification that the Tire Inspection was added.
| Info |
|---|
You can review the Tire Reading Transactions from the Asset file in Web. Refer to the Completed Tire Inspection section in Adding Tire Inspection |