Hold the Barcode Readers trigger for several seconds, the blue LCD light will show steady for a few seconds then flash and go off. Keep holding the trigger until a red LCD light will flash on and off, then release the trigger. On the USB Base Dongle that is plugged into the computer, press the “Sync” button until its LED light flashes red. When the red light goes off release the button. The Dongle LCD will now display a green light. With the Barcode Reader, scan the Pairing Barcode on the RF Scanner Installation Sheet (last page at bottom), to pair the Base with the Scanner. The Scanner LCD will flash red, then steady blue, and turn off. If you do not have the RF Scanner Installation Sheet, please follow this link to find a page you can print out with the barcode. http://customers.rtafleet.com/files/lz360rf%20pairing.pdf
|