Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Current »

Adding a Tire Inspection

Once the Tire and Axle Setup is complete you can enter the Tire inspections electronically in the system. See RTA Web - Tire Inspection Setup for more information on how to.

Inspections can be entered five different ways:

  1. In the Asset File Manually (See Below)

  2. From the Standard Work Orders. Refer to RTA Web - Work Order Tire Inspection to Add Tire Inspections in Work Orders.

  3. From Work Orders in Paperless Shop. Refer to RTA Web - Shop Tire Inspection to Add Tire Inspections in Paperless Shop.

  4. From the Standard Work Orders in Mobile. Refer to RTA Mobile - Work Order Tire Inspection to Add Tire Inspections in Mobile Work Orders.

  5. From Work Orders in Mobile Paperless Shop. Refer to RTA Mobile - Paperless Shop Tire Inspection to Add Tire Inspections in Mobile Paperless Shop.

Adding a Tire Inspection through the Asset File

Select the Tire Inspection Section from in the Asset file

Tire-Inspect-Section.png

Tire Inspection Section

Tire-Screen-AfterSetup.png

Select the (plus) button

List-Options-Plus.png

This following Inspection entry panel will pop up:

New-Inspection.png

🔓 Denotes fields that are editable within RTA Web

The following items will be presented in the Tire New Inspection screen.

  • Asset – This field displays the Asset Number you are inputting the inspection for

  • 🔓 Date – Select the date when the inspection was Completed

  • 🔓 Odometer – Select the Asset Odometer reading when the inspection was Completed

  • 🔓 PSI/TD – Enter the Pressure Reading (PSI) and Tread Depth Reading per axle

    • These tie into the axle and position codes that were setup initially for the asset. See RTA Web - Tire Inspection Setup for more information

    • Note the data entry prompts will repeat for all position and axle combinations for this vehicle

    • Also below the PSI and TD (Tread Depth) numbers foes show the recommended minimum numbers

Once the sections are updated then select the Submit Button.

Submit-Button.png

Completed Tire Inspection Transaction

Once a Tire Inspection is completed the transaction gets added to the Asset file as a permanent record that can easily be reviewed throughout the service life of the Asset.

Tire-Inspection List With Inspections-FN2.png

Note: If any of the readings do not meet the minimums then you will see ⚠️ icon show up in the Issues column.

  • No labels