Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Adding a Brake Inspection

Once the Brake Inspection Setup is complete you can enter the Brake inspections electronically in the system. See RTA Web - Brake Inspection Setup for more information on how to.

Inspections can be entered five different ways:

  1. In the Asset File Manually (See Below)

  2. From the Standard Work Orders. Refer to RTA Web - Work Order Brake Inspection to Add Brake Inspections in Work Orders.

  3. From Work Orders in Paperless Shop. Refer to RTA Web - Shop Brake Inspection to Add Brake Inspections in Paperless Shop.

  4. From the Standard Work Orders in Mobile. Refer to RTA Mobile - Work Order Brake Inspection to Add Brake Inspections in Mobile Work Orders.

  5. From Work Orders in Mobile Paperless Shop. Refer to RTA Mobile - Paperless Shop Brake Inspection to Add Brake Inspections in Mobile Paperless Shop.

Adding a Brake Inspection through the Asset File

Select the Brake Inspection Section from in the Asset file

Brake-Inspect-AssetMenu.png

Brake Inspection Section

Brake-Inspection-MainScreen.png

Select the (plus) button

List-Options-Plus.png

This following Inspection entry panel will pop up:

New-BrakeInspection.png

πŸ”“ Denotes fields that are editable within RTA Web

The following items will be presented in the Tire New Inspection screen.

  • Asset – This field displays the Asset Number you are inputting the inspection for

  • πŸ”“ Date – Select the date when the inspection was Completed

  • πŸ”“ Odometer – Select the Asset Odometer reading when the inspection was Completed

  • Unit – This is the Unit of Measure for the Brake Inspection Readings:

    • Percentage

    • Inches

    • Millimeters

    • 32nds

  • Axle – This is the Axle Position for the Brake Inspection Readings (Note: You can set between one and eight Axles)

  • πŸ”“ Left – Left side reading per axle

  • πŸ”“ Right – Right side reading per axle

Once the sections are updated then select the Submit Button.

Submit-Button.png

Completed Brake Inspection Transaction

Once a Brake Inspection is completed the transaction gets added to the Asset file as a permanent record that can easily be reviewed throughout the service life of the Asset.

Brake-History.png

Note: If any of the readings are below the Critical threshold then you will see the Red❗icon show up in the Issues column.

Hovering over the Red❗in the issues column will also pop up information about the warning.

image-20240510-213236.png

  • No labels