Centralized Parts Set Up

Centralized Parts Set Up

  1. Navigate to System Switches under “Admin” in the left hand menu panel

 

System switches.png
  1. Click on the “PARTS” tab

 

Parts tab.png
  1. Click on Centrailzed Parts

 

  1. Slide the toggle to turn on Centralized Parts and click “SAVE”

 

 

Changing the Default Main Facility

 

  1. The default main facility will be facility 1, if you need to select a different facility to be the main (parent facility), navigate to Organization Tab in the left side menu panel and click on Facilities

 

  1. Once the facility listing opens, select the sub facility and click on the Facility Settings tab

 

  1. When Facility Settings open, navigate to the Link Facility Parent box located in the bottom right of the Facility Defaults info panel

 

  1. Select from the drop down options which facility will be the main parts facility for this sub facility

 

  1. Repeat steps 2-5 for each sub facility if your main parts facility is NOT Facility 1, remember Facility 1 is the default Main Facility